Preparation:
1. Install the antennas and position them upwards.
2. Insert the SIM card into the slot until you hear a click.
3. Connect the power adapter to the router and power it on.
Step 1:
Open a web browser and go to http://cudy.net or http://192.168.10.1. Input the administrator password to log in.
Note: The default administrator password is "admin" if the firmware version is 1.X.X. We have removed the default administrator password since the firmware version 2.X.X. You must set the administrator password when first log in.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, select your 'Time Zone'.
Step 3: Configure the APN parameters. Most of the time we only just need keep APN Profile as " Auto". Then click "Next". The router will choose the APN parameters automatically. (Recommend)
If you want to customize the APN parameters. You can choose APN Profile as " Manual", and input the correct APN parameters.
Note: If you are not sure about the APN parameters, please contact your Internet Service Provider.
Step 4: Change the wireless network name and password or keep them default.
Step 5: Click "Save & Apply" to complete the configuration.
Step 6: When the Status is connected, you can enjoy the internet.
14 comments
@David A
Dear Customer，
Thank you for contacting Cudy support team. Our technical support has contacted you via email. Please check.
""Just purchased a Cudy AC1200 Mbps Dual Band 4G LTE Router, inserted Sim, turned on set up and all worked ok.
Tested using mobile phone, then when trying to connect a laptop would only connect to non 5g, and then stopped connecting altogether.
Have reset and there is no internet connection, have tried different Sim and still no internet connection.
The router just won’t connect anymore. Any steps I can take or does it need returning?
Just purchased a Cudy AC1200 Mbps Dual Band 4G LTE Router, inserted Sim, turned on set up and all worked ok.
Tested using mobile phone, then when trying to connect a laptop would only connect to non 5g, and then stopped connecting altogether.
Have reset and there is no internet connection, have tried different Sim and still no internet connection.
The router just won’t connect anymore. Any steps I can take or does it need returning?
@claudio,
Dear Customer，
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Cudy LT400 Router 4G LTE Con Sim, 300Mbps,
con la sim kena il router funziona. Con due sim nuove della optima il router non va in rete.”
Cudy LT400 Router 4G LTE Con Sim, 300Mbps,
con la sim kena il router funziona. Con due sim nuove della optima il router non va in rete.
@Loni,
Gentile cliente.
Grazie per aver contattato il team di assistenza Cudy. La preghiamo di seguire i passi indicati:
1. Provare a ripristinare le impostazioni di fabbrica del router premendo a lungo il pulsante di ripristino per circa 3 secondi. È possibile rilasciare il pulsante di reset quando il LED lampeggia.
Quindi provare a installare nuovamente il router e verificare se il router può funzionare?
2. In caso contrario, descrivere il problema. I LED del router si accendono all’accensione? È possibile cercare e connettersi al WiFi del router sul telefono o sul computer? È possibile accedere alla pagina web del router?
3. Se i LED del router non si accendono quando si accende il router, provare a cambiare un altro alimentatore funzionante con la stessa tensione di uscita.
“Non riesco più a connettermi con cudy, potete aiutarmi?”