PoE-Switch
FS1006P
1 5

4-FE PoE-Switch mit 2 Uplink FE

4-FE PoE-Switch mit 2 Uplink FE, FS1006P 2.0

FS1006P 2.0

Ein wandmontierter 6-FE-PoE-Switch mit einem 65-W-Netzteil und einem leisen Kühlsystem.

  • 4× FE mit 802.3at/af Mode A PoE
  • 2× Uplink FE
  • 65-W-Netzteil
  • Standard-/VLAN-/Erweitert-Modi
  • Watchdog under VLAN or Extend Modes
  • Desktop, Wandmontage
  • 200×118×44 mm (7,87×4,65×1,73'')
Vollständige Details anzeigen
Modellversion
Modellversion FS1006P 2.0
Interfaces
Interfaces Physical Buttons VLAN/Default/Extend DIP Switch
10/100 Mbps RJ45 Ports 2
10/100 Mbps RJ45 PoE Ports 4
Max Power on a Single PoE Port 30W
PoE Port Notes PoE ports support 802.3at/af standards.
Extend Mode Ports #1~#4
VLAN Mode Ports #1~#4
LED
  • Power
  • Link/ACT of Each Ethernet Port
  • DIP Mode (SW)
Power Input AC Inlet
Performance
Performance Copper Speed and Distance
  • Cat. 3 or higher cable: 100 meters at 10 Mbps
  • Cat. 5 or higher cable: 100 meters at 100 Mbps
  • Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note 250-meter transmission is only available on the Extend Mode ports.
MAC Address Table 1024
Max Switching Capacity 1.2 Gbps
Max Forwarding Rate 0.8928 Mpps
Packet Buffer 448 Kbit
Power
Power Power Methods AC
AC Input: 100 V - 240 V, 50 Hz
Output: 52 V, 1.25 A
Max Power Consumption 65W
Max Power Excluding PoE 5W
Switching
Switching 802.3 Protocols
  • 802.3i 10BASE-T
  • 802.3u 100BASE-T
  • 802.3x Flow Control
  • 802.3af PoE
  • 802.3at PoE
Reliability
Reliability Grounding Methods
  • Three-Prong Plug
  • Grounding Point
Environment Operating Temperature: -20~50 ℃ (-4~122 ℉)
Storage Temperature: -40~85 ℃ (-40~185 ℉)
Operating Humidity: 0~90% non-condensing
Storage Humidity: 0~95% non-condensing
Mechanical
Mechanical Dimension 200×118×44 mm
7.87×4.65×1.73 inches
Casing Material Metal
Installation
  • Desktop
  • Wall-mount
Package Content
Package Content
  • FS1006P
  • Power Cord
  • Installation Guide