WLAN-Router
WR300

Perfekt für ein 100-Mbit/s-Breitband

Lässt sich problemlos mit kabelgebundenen Geräten teilen

One WAN port plus three LAN ports let you connect multiple devices via stable Ethernet cable without needing another network switch.

Verbindet 30 Geräte drahtlos

Enjoy high-speed WiFi together when your friends come with ample WiFi capacity. 2×2 MIMO enables devices to use both antennas to improve the experience.

No matter whether you want to connect to a public network expand a trusted network, or even use it as a Wi-Fi adapter (client) for your wired devices. It adapts to multiple scenarios like a breeze.

Einfache Einrichtung und vielseitige Verwaltung

Einfach zu bedienen

An intuitive setup wizard guides you to config your new network.

WLAN-Zeitplan

Set a bedtime and a domain blacklist to regulate your children's online behaviour.

WireGuard VPN-Client

Allows you to connect multiple devices at once to your private or commercial VPN.

Cudy Mesh-Satellit

Works as a Mesh node with other Cudy Mesh device to enable fast roaming when moving between Wi-Fi zones.

1 7

N300 Multi-Mode-WLAN-Router

N300 Multi-Mode-WLAN-Router, WR300 1.0

WR300 1.0

Ein WLAN-Router mit vier Fast-Ethernet-Ports ermöglicht eine reibungslose Videowiedergabe und einen Internetzugang mit maximal 100 Mbit/s, mit Cudy Mesh und lokaler App-Steuerung.

  • 300 Mbit/s WLAN 1
  • 4× Fast-Ethernet-Ports
  • Deckt 90 m² ab 2
  • Router/AP/RE/WISP/Client/Mesh-Modi
  • VPN-Client von WireGuard, PPTP, L2TP
  • Cudy-App
Vollständige Details anzeigen
Hardware-Spezifikationen
Software-Spezifikationen
Modellversion
Modellversion WR300 1.0
CPU
CPU Chipset MT7628
CPU Details 580 MHz Single-Core, MIPS24KEC
Memory/Storage
Memory/Storage Flash/ROM 8 MB (64 Mbit ) NOR
DDR/RAM 64 MB (512 Mbit) DDR2
Wireless
Wireless 2.4 GHz Wi-Fi Speed 300 Mbps
2.4 GHz Wi-Fi Streams 2T2R (2×2 MIMO)
Wi-Fi Antennas 2× Fixed
Range Performance Max: 130 m (427 ft)
Indoor WiFi range varies depending on the layout and wall materials. See Wall Performance spec for placement suggestions.
Wall Performance One wooden walls with thickness < 10 cm (4'')
One concrete wall with thickness < 10 cm (4'')
Interfaces
Interfaces 10/100 Mbps RJ45 Ports 4
Ethernet Notes 1× WAN port, the rest are LAN ports
LED System
Physical Buttons
  • WPS Button
  • Reset Button
Power Input DC Jack
Power
Power Power Methods DC
DC 5V 1A
Power Adapter Input: 100 ~ 240 V, 50/60 Hz AC
Output: 5V 1A DC
Reliability
Reliability Environment
  • Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉)
  • Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
  • Humidity: 10% ~ 90% non-condensing
  • Storage Humidity: 5% ~ 95% non-condensing
Certifications
Certifications FCC, CE
Mechanical
Mechanical Installation Desktop
Dimension 118×80×27.5 mm
4.65×3.15×1.08 inches
Product Weight 120 g (4.23 oz.)
Package Content
Package Content
  • WR300
  • Power Adapter
  • Ethernet Cable
  • Installation Guide
Ordering Information
Ordering Information Retail Package Weight EU: 336 g (11.85 oz.)
Retail Package Dimension 176×140.5×56 mm
6.93×5.53×2.2 inches
Units per Carton 40
Carton Dimension 60×30×37.5 cm
23.62×11.81×14.76 inches
Carton Gross Weight EU: 14.4 kg (31.75 lbs)
Carton Net Weight EU: 13.4 kg (29.54 lbs)
Modellversion
Modellversion WR300 1.0
Wireless
Wireless Wi-Fi Standards Wi-Fi 4
Max Wi-Fi Modulation 64-QAM
Max Capacity 64
Recommended Client Upper Limit 30
Max Wi-Fi Channel Width 40 MHz
Wi-Fi Security WPA/WPA2/WPA3
Guest Network 2.4 GHz
WPS True
General
General Operation Modes
  • Wi-Fi Router
  • Access Point
  • Range Extender
  • WISP
  • Client
Mesh Cudy Mesh
Mesh Backhaul
  • Wireless Backhaul
  • Wired Backhaul
WAN Mode
  • DHCP
  • Static IP
  • PPPOE
Internet Failover Sequence
  • WAN
  • WISP
Network
Network QoS Per-User Rate Limiting
DHCP
  • Address Reservation
  • DHCP Client List
  • Server
IP Versions IPv4/IPv6
IPv6 Protocols
  • Relay
  • Dynamic (SLAAC/DHCPv6)
  • Staic (Fixed IP)
  • Passthrough
  • 464XLAT
  • MAP-E
  • DS-Lite
IPTV/VLAN
  • Bridge
  • Tag VLAN
TTL Customization
  • Extend
  • Spoof
  • Custom
IGMP
  • IGMP Proxy
  • IGMP Snooping
Forwarding
  • Port Forwarding
  • Port Triggering
  • UPnP
  • DMZ
Firewall
  • SPI Firewall
  • DoS Protection
  • Block PING
Application Layer Gateway
  • IPSec Passthrough
  • L2TP Passthrough
  • PPTP Passthrough
  • FTP Passthrough
  • TFTP Passthrough
  • H323 Passthrough
  • SIP Passthrough
  • RTSP Passthrough
Utilities
Utilities VPN Client
  • Wireguard
  • PPTP
  • L2TP
VPN Performance
  • WireGuard Client (UL/DL): 49 / 43 Mbps
  • WireGuard Server (UL/DL): 43.6 / 48 Mbps
DNS Options
  • DNS over TLS
  • Manual DNS
  • Rebind Protection
  • Override Clients' DNS
DNS over TLS Providers
  • Cloudflare
  • Google
  • Quad9
  • Custom
Wake on LAN True
Online Detection True
Management
Management All Devices Management
  • Wi-Fi Time Schedule
  • MAC Filter
  • IP/MAC Binding
Per-Devices Management
  • Intenent On/Off
  • VPN On/Off
  • Online Time Schedule
  • Device Rename
Content Management
  • Domain Filter
  • IP Filter
System
System LED Control ture
Local Control Method
  • Config Web Page
  • App Control
Remote Control Method
  • Config Page via HTTPS
  • TR069/TR098/TR111/TR181
Firmware Upgrade Local Update
Reliability
  • Timed Reboot
  • Backup and Restore
Diagnostic Tools
  • Diagnosis
  • Ping
  • Traceroute
  • NSLookup
  • System Log
Languages
  • English
  • Bengali
  • Catalan
  • Czech
  • German
  • Greek
  • Spanish
  • French
  • Hebrew
  • Croatian
  • Hungarian
  • Italian
  • Japanese
  • Khmer
  • Korean
  • Dutch
  • Norwegian
  • Polish
  • Portuguese
  • Romanian
  • Russian
  • Slovak
  • Swedish
  • Thai
  • Turkish
  • Ukrainian
  • Vietnamese
  • Simplified Chinese
  • Traditional Chinese
Dashboard
Dashboard Panel
  • Internet Status
  • Mesh Status
  • Devices Management
  • WAN Status
  • LAN Status
  • WISP Status
  • Wi-Fi Status
  • VPN Status
  • DHCP Server Status
  • System Version
Charts
  • Mesh Topology
  • Internet Speed
  • WISP Speed
  • Wi-Fi Speed
  1. Der tatsächliche drahtlose Datendurchsatz variiert je nach Netzwerkbedingungen, Client-Einschränkungen und Umgebungsfaktoren wie Gebäudelayout, Hindernissen und Client-Standort.
  2. Der Anspruch auf Mobilfunkabdeckung dient nur als Referenz. Die Abdeckungsleistung variiert aufgrund von Umgebungsfaktoren wie Gebäudelayout, Hindernissen, Verkehrsaufkommen und -dichte sowie Gerätestandort. Für eine optimale Abdeckung platzieren Sie das Gerät bitte an einem zentralen Ort innerhalb des Bereichs, in dem WLAN benötigt wird.