AP

AP1200

Descripción general
Características
Especificaciones
Descargar

Responsive and Wide-Coverage Wi-Fi for SMB

AP1200 delivers seamless, high-speed dual-band Wi-Fi that supports both new and legacy devices on their respective bands. Ideal for small-sized offices, and classrooms.

Responsive and Wide-Coverage Wi-Fi for SMB

AP1200 delivers seamless, high-speed dual-band Wi-Fi that supports both new and legacy devices on their respective bands. Ideal for small-sized offices, and classrooms.

Connect More Devices

With MU-MIMO technology, multiple devices can receive data simultaneously, enhancing efficiency and performance even under heavy usage.

Boosted Coverage

Beamforming technology tracks connected devices' directions and boosts signal towards them, improving coverage performance.

Cobertura perfecta con roaming rápido

Soporte de malla (802.11k/v) permite a los clientes cambiar entre puntos de acceso sin problemas, lo que garantiza llamadas Wi-Fi ininterrumpidas o transmisión en vivo cuando se mueven. Esta función requiere un router Cudy Wi-Fi/router VPN/controlador de punto de acceso como puerta de enlace con firmware posterior a 15.28.

Funciones empresariales avanzadas

Portal cautivo

Mejore el conocimiento de su marca mostrando una imagen personalizada página de inicio de sesión para nuevos clientes.

Dirección de banda

Asignar dispositivos a bandas menos congestionadas.

Selección automática de canales

Evita interrupciones de señal con puntos de acceso cercanos.

Optimización automática de malla

Forme un backhaul de malla automáticamente a través de rutas menos congestionadas .

Backhaul híbrido flexible, cableado e inalámbrico

Backhaul de malla inalámbrico simple

Backhaul híbrido para un mayor rendimiento

Multi-Mode for Multiple Scenarios

Access Point

Simply create a Wi-Fi spot behind a router.

Wi-Fi Router

Please use the router mode when PPPoE authorization is needed or when creating a separate subnet is needed.

Range Extender

The Wi-Fi Extender (repeater) mode extends existing Wi-Fi coverage to hard-to-cover areas.

WISP

WISP extends Wi-Fi but creates a subnet for connected devices, so it's safer than extender mode.

Versatile Powering and Installation

PoE or DC Power Supply

Supports 802.3at/af PoE, 24-57V Passive PoE, and DC Power Supply. DC power adapter is included in the box.

Versatile Mounting

Mounting kits are included in the box.

NaN -Infinity

Punto de acceso Wi-Fi AC1200

Punto de acceso Wi-Fi AC1200, AP1200 1.0

AP1200 1.0

Variantes de producto

Un punto de acceso WiFi para montaje en pared/techo diseñado para oficinas y aulas pequeñas.

4-Stream Dual-Band Wi-Fi 5
Wi-Fi de 867 Mbps + 300 Mbps ¹
1 × puerto Fast Ethernet (entrada PoE)
802.3at/af, PoE pasivo, CC
Cubre 100 m² (1100 pies²) ²
50 dispositivos conectados ³

Ver todos los detalles

Especificaciones de hardware

Especificaciones de software

Versión del modelo
Versión del modelo	AP1200 1.0
CPU
CPU	Chipset	MT7628A
	CPU Details	580 MHZ Single-Core CPU
Memory/Storage
Memory/Storage	Flash/ROM	16 MB (128 Mbit) NOR
	DDR/RAM	128 MB (1 Gbit) DDR2
Wireless
Wireless	5 GHz Wi-Fi Speed	867 Mbps
	2.4 GHz Wi-Fi Speed	300 Mbps
	5 GHz Wi-Fi Streams	2T2R (2×2 MIMO)
	2.4 GHz Wi-Fi Streams	2T2R (2×2 MIMO)
	Wi-Fi Antennas	4× Internal
	5 GHz Antenna Gain Max	4.64dBi
	2.4 GHz Antenna Gain Max	5.31 dBi
	FEM or PA/LNA	5 GHz: 2× Internal 2.4 GHz: 2× Internal
	Beamforming	True
	Range Performance	Max: 170 m (558 ft) Indoor WiFi range varies depending on the layout and wall materials. See Wall Performance spec for placement suggestions.
	Wall Performance	Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'')
Interfaces
Interfaces	Gigabit RJ45 Ports	1
	Ethernet Notes	Accepts PoE powering
	LED	System
	Physical Buttons	Reset Button
	Power Input	DC Jack, PoE via Ethernet Port
Power
Power	Power Methods	DC Passive PoE 802.3at/af PoE
	DC	12V 1A
	Passive PoE	24V
	Power Adapter	AP1200 \| DC Adapter in the box: Input: 100 ~ 240 V, 50/60 Hz AC Output: 12V 1A DC AP1200P \| PoE Adapter in the box: Input: 100 ~ 240 V, 50/60 Hz AC Output: 24V Passive PoE
	Max Power Consumption (W)	12 W
	Idle Power Consumption (W)	2.5 W
Reliability
Reliability	EMS	ESD: Contact: 4kV; Air: 8kV
	Environment	Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 90% non-condensing
Certifications
Certifications	FCC, CE
Mechanical
Mechanical	Installation	Wall-mount Ceiling-mount
	Dimension	Φ231.9×57.1 mm Φ9.13×2.25 inches
	Product Weight	370.5 g (13.07 oz.)
Package Content
Package Content	AP1200 Power Adapter Mounting Kit Installation Guide
Ordering Information
Ordering Information	Retail Package Weight	EU: 781.1 g (27.55 oz.)
	Retail Package Dimension	283×238×68 mm 11.14×9.37×2.68 inches
	Carton Net Weight	9.26 kg (20.41 lbs) EU: 15.6 kg (34.39 lbs)
	Carton Gross Weight	10.24 kg (22.58 lbs) EU: 16.7 kg (36.82 lbs)
	Units per Carton	20
	Carton Dimension	58×37.5×49.5 cm 22.83×14.76×19.49 inches

Versión del modelo
Versión del modelo	AP1200 1.0
Wireless
Wireless	Wi-Fi Standards	Wi-Fi 5
	Max Wi-Fi Modulation	256-QAM
	Wi-Fi Efficiency	MU-MIMO
	Wi-Fi Efficiency Note	MU-MIMO available on 5 GHz
	Max Capacity	128
	Recommended Client Upper Limit	50
	Max Wi-Fi Channel Width	80 MHz
	Wi-Fi Security	WPA/WPA2/WPA3
	Guest Network	2.4 GHz, 5 GHz
	WPS	True
General
General	Operation Modes	Wi-Fi Router Access Point Range Extender WISP Client
	Mesh	Cudy Mesh
	Mesh Backhaul	Wireless Backhaul Wired Backhaul
	Multi-Band Backhaul	True
	WAN Mode	DHCP Static IP PPPOE PPTP L2TP
Network
Network	QoS	Per-User Rate Limiting
	DHCP	Address Reservation DHCP Client List Server
	IP Versions	IPv4/IPv6
	IPv6 Protocols	Relay Dynamic (SLAAC/DHCPv6) Static (Fixed IP) Passthrough 464XLAT MAP-E DS-Lite
	IPTV/VLAN	Bridge Tag VLAN VoIP VLAN IPTV VLAN
	TTL Customization	Extend Spoof Custom
	IGMP	IGMP Proxy IGMP Snooping
	Forwarding	Port Forwarding Port Triggering UPnP DMZ
	Firewall	SPI Firewall DoS Protection Block PING
	Application Layer Gateway	IPSec Passthrough L2TP Passthrough PPTP Passthrough FTP Passthrough TFTP Passthrough H323 Passthrough SIP Passthrough RTSP Passthrough
Utilities
Utilities	Captive Portal	True
	VPN Server	WireGuard OpenVPN IPsec Zerotier PPTP L2TP
	VPN Client	WireGuard OpenVPN IPsec Zerotier PPTP L2TP
	DNS Options	DNS over TLS Manual DNS Rebind Protection Override Clients' DNS
	DNS over TLS Providers	Cloudflare Google Quad9 Custom
	Wake on LAN	True
	Online Detection	True
Management
Management	All Devices Management	Wi-Fi Time Schedule MAC Filter IP/MAC Binding
	Per-Devices Management	Internet On/Off VPN On/Off Online Time Schedule Device Rename
	Content Management	Domain Filter IP Filter
System
System	LED Control	True
	Local Control Method	Config Web Page App Control
	Remote Control Method	Config Page via HTTPS App Control TR069/TR098/TR111/TR181
	Firmware Upgrade	Local Update App (Over the Air) Online Update
	Reliability	Timed Reboot Backup and Restore
	Diagnostic Tools	Diagnosis Ping Traceroute NSLookup System Log
	Languages	English Bengali Catalan Czech German Greek Spanish French Hebrew Croatian Hungarian Italian Japanese Khmer Korean Dutch Norwegian Polish Portuguese Romanian Russian Slovak Swedish Thai Turkish Ukrainian Vietnamese Simplified Chinese Traditional Chinese
Dashboard
Dashboard	Panel	Internet Status Mesh Status Devices Management WAN Status LAN Status WISP Status Wi-Fi Status VPN Status DHCP Server Status System Version
	Charts	Mesh Topology Internet Speed WISP Speed Wi-Fi Speed
General
General	Internet Failover Sequence	WAN WISP

El rendimiento de datos inalámbricos real variará como resultado de las condiciones de la red, las limitaciones del cliente y los factores ambientales, incluidos el diseño del edificio, los obstáculos y la ubicación del cliente.
El reclamo de cobertura inalámbrica sirve solo como referencia. El rendimiento de la cobertura variará debido a factores ambientales que incluyen la distribución del edificio, los obstáculos, el volumen y la densidad del tráfico y la ubicación del dispositivo. Para una cobertura óptima, coloque el dispositivo en una ubicación central dentro del área que requiera Wi-Fi.
El rendimiento real de varios dispositivos puede verse afectado por los tipos de aplicaciones utilizadas, el ancho de banda total disponible y las capacidades de sus dispositivos. Conectar dispositivos Wi-Fi antiguos (estándares heredados) puede reducir la eficiencia general. El uso de funciones de eficiencia requiere dispositivos cliente compatibles que también admitan esas funciones. Encuentre más información sobre las funciones de eficiencia admitidas en la sección de software de la hoja de cálculo de Especificaciones.