1. Téléchargez et décompressez le fichier depuis ici.
2. Téléchargez le dernier micrologiciel à partir de site officiel et renommez-le en 'recovery.bin'.
3. Éteignez votre routeur. Débranchez l'adaptateur secteur ou appuyez sur le bouton POWER.
4. Connectez votre ordinateur au port LAN du routeur avec un câble Ethernet.
5. Configurez manuellement l'adresse IP de votre ordinateur sur « 192.168.1.88 ».
6. Exécutez 'tftp32.exe'.
7. Exécutez « netsh advfirewall set allprofiles state off » dans la ligne de commande pour désactiver le pare-feu Windows, sinon tftp sera bloqué.
8. Appuyez sur le bouton/trou « Réinitialiser » et maintenez-le enfoncé. Avant la mise sous tension du routeur et avant que le TFTP ne commence à télécharger le micrologiciel, ne relâchez pas le bouton/trou « Réinitialiser ».
9. Allumez le routeur.
10. Lorsque les lumières clignotent toutes rapidement ou lorsque le TFTP commence à télécharger le micrologiciel, vous pouvez relâcher le bouton/trou « Réinitialiser ».
11. Lorsque le voyant clignote lentement, la mise à niveau est terminée.
12. Veuillez récupérer l'adresse IP de votre ordinateur pour qu'elle soit une adresse IP dynamique.
13. Terminé.
47 commentaires
@Chris,
Thank you for you help. I have sent the method “connect to the WAN port” to Ivan.
“Hi Team, I can answer myself; got it running to flash back to Cudy FW for a TR1200 by connecting to the WAN (!) Port on Cudy; not the LAN port. That was the only thing different for TR1200 compared to the the description above”Hi Team, I can answer myself; got it running to flash back to Cudy FW for a TR1200 by connecting to the WAN (!) Port on Cudy; not the LAN port. That was the only thing different for TR1200 compared to the the description above
Hi Cudy support, I do have the same issue as Ivan for TR1200.
I could download the TFTP32 for windows and follow all the steps above; but does not work to update / downgrade to original Cudy FW. Can you help?
@Stev0,
Our technical support has sent you the solutions via email. Please check.
“I recently bought a 3-pack M1800 Mesh set. I wanted try OpenWRT and flashed the firmware on all 3 M1800 units. It worked fine. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware.”
I recently bought a 3-pack M1800 Mesh set. I wanted try OpenWRT and flashed the firmware on all 3 M1800 units. It worked fine. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware.
However, after successfully flashing Cudy’s newest official firmware for the M1800 v2 (M1800V2-R28-2.1.3-20240509-102323), I get an “invalid board info!” error at the device login page (192.168.10.1) where one needs to create a new admin password. The website-header also reads a strange “lede” title.
I also tried an older firmware version available on Cudy’s website (M1800V2-R28-1.16.14-20231117-190903), but unfortunately receive the same error. After trying to flash a second M1800 mesh unit, the unit also stared giving the same error. I even tried to flash OpenWRT back onto one of the units, but now it does not want to accept the OpenWRT firmware.
What does the “Invalid board info!” error mean and how can it be fixed?