Passer aux informations produits
1 de 1

8-Port 10/100 Mbps Industrial PoE+ Switch

8-Port 10/100 Mbps Industrial PoE+ Switch, IF1008P 2.0

IF1008P 2.0

A 8-FE industrial PoE switch for networking in harsh conditions such as manufacturing, transportation, maritime, oil & gas, and mining.


  • 8× FE, Shielded, ±6kV Surge Resistant
  • 8× 802.3at/af Mode A PoE
  • IP40, -40~70°C (-40~158°F)
  • Dual-Power Redundancy, 9.6~60V Range
  • Polarity Reverse Protection
  • Short Circuit Protection
  • Broadcast Storm Prevention On/Off
  • Chien de garde activé/désactivé
  • Extend On/Off, VLAN On/Off
  • Integrated DIN-Rail Bracket
Afficher tous les détails
Version du modèle
Version du modèle IF1008P 2.0
Interfaces
Interfaces 10/100 Mbps RJ45 Ports 8
10/100 Mbps RJ45 PoE Ports #1~#8
Max Power on a Single PoE Port 30W
PoE Port Notes The PoE ports comply with IEEE 802.3at/af standards.
Extend Mode Ports #1~#4
VLAN Mode Ports #1~#7
LED
  • Power 1
  • Power 2
  • Link/ACT of Each Ethernet Port
  • PoE Status of Each PoE Port
Power Input Phoenix Terminal 4-PIN
Physical Buttons
  • PoE Watchdog On/Off
  • VLAN On/Off
  • Extend On/Off
  • Broadcast Storm Prevention On/Off
Physical Buttons Note The PoE Watchdog will attempt to reboot the plugged-in clients that have been inactive for 5 minutes. Do not turn it on for clients with online auto-upgrade feature.
Performance
Performance Copper Speed and Distance
  • Cat. 3 or higher cable: 100 meters at 10 Mbps
  • Cat. 5 or higher cable: 100 meters at 100 Mbps
  • Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note 250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
MAC Address Table 2048
Max Switching Capacity 1.6 Gbps
Max Forwarding Rate 1.1904 Mpps
Jumbo Frame 2 KB
Packet Buffer 768 Kbit
Power
Power Power Methods DC
Power Redundancy Dual Inputs
DC 44~57V
Max Power Consumption 240W
Max Power Excluding PoE 1.0W
Idle Power Consumption 0.25W
Polarity Reverse Protection True
Short Circuit Protection True
Switching
Switching 802.3 Protocols
  • 802.3i 10BASE-T
  • 802.3u 100BASE-TX
Reliability
Reliability Grounding Methods Grounding Point
Safety IEC/EN 62368
EMC EN55032 Class A
EN55035 Class A
EMI FCC 47 CFR Part 15B Class A
EMS IEC/EN 61000-4-2, Level 4 ESD: Contact: 8kV; Air: 15kV
IEC/EN 61000-4-3, Level 4 RS: 80 MHz to 1 GHz: 10 V/m
IEC/EN 61000-4-4, Level 4 EFT: Power: 2kV; RJ45: 4kV
IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV
IEC/EN 61000-4-6, Level 3 CS: 10V
IEC/EN 61000-4-8, Level 5 PFMF
IEC/EN 61000-4-9, Level 5
IEC/EN 61000-4-10, Level 5
EMS Note The levels listed in each EMS field are the highest level defined in the IEC/EN standard.
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Free Fall IEC 60068-2-32
Environment Operating Temperature: -40 ℃ ~ 75 ℃ (-40 ℉ ~167 ℉)
Storage Temperature: -40 ℃ ~ 85 ℃ (-40 ℉ ~ 185 ℉)
Operating Humidity: 5% ~ 95% non-condensing
Storage Humidity: 5% ~ 95% non-condensing
Mechanical
Mechanical Dimension 114×103×47.5 mm
4.49×4.06×1.87 inches
Casing Material Aluminum
Ingress Protection IP40
Installation
  • DIN-Rail
  • Wall-mount via Brackets (Brackets not included in the box)
Package Content
Package Content
  • IF1008P
  • Installation Guide