Version du modèle | ||
---|---|---|
Version du modèle | M11000 1.0 | |
CPU | ||
CPU | Chipset | Qualcomm IPQ5322 |
CPU Details | 1.5 GHz Quad-Core CPU | |
Memory/Storage | ||
Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
DDR/RAM | 512 MB (4 Gbit) DDR4 | |
Wireless | ||
Wireless | 6 GHz Wi-Fi Speed | 5760 Mbps |
5 GHz Wi-Fi Speed | 4320 Mbps | |
2.4 GHz Wi-Fi Speed | 688 Mbps | |
6 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
5 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
Wi-Fi Antennas | 6× Fixed | |
6 GHz Antenna Gain Max | 5dBi | |
5 GHz Antenna Gain Max | 5dBi | |
2.4 GHz Antenna Gain Max | 5dBi | |
FEM or PA/LNA |
|
|
Beamforming | True | |
Range Performance |
Max: 260 m (853 ft) Indoor WiFi range varies depending on the layout and wall materials. See Wall Performance spec for placement suggestions. |
|
Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
Indoor Coverage Reference |
2 Pack: 250 m² (2700 sq ft) 3 Pack: 350 m² (3700 sq ft) Applied to wireless backhaul situation. Place in the center of each floor, with a maximum of three obstacles to each room. |
|
Interfaces | ||
Interfaces | 2.5G RJ45 Ports | 4 |
Ethernet Notes | 1× WAN port, the rest are LAN ports | |
LED |
|
|
Physical Buttons |
|
|
Power Input | DC Jack | |
Power | ||
Power | Power Methods | DC |
DC | 12V 2A | |
Power Adapter |
Input: 100 ~ 240 V, 50/60 Hz AC Output: 12V 2A DC |
|
Reliability | ||
Reliability | Environment |
|
Certifications | ||
Certifications | FCC, CE | |
Mechanical | ||
Mechanical | Installation | Desktop |
Dimension |
Φ116×202 mm Φ4.57×7.95 inches |
|
Package Content | ||
Package Content |
|
Version du modèle | ||
---|---|---|
Version du modèle | M11000 1.0 | |
Wireless | ||
Wireless | Wi-Fi Standards | Wi-Fi 7 |
Max Wi-Fi Modulation | 4K-QAM | |
Wi-Fi Efficiency |
|
|
Max Capacity | 768 | |
Recommended Client Upper Limit | 300 | |
Max Wi-Fi Channel Width | 320 MHz | |
Wi-Fi Security | WPA/WPA2/WPA3 | |
Guest Network | 2.4 GHz, 5 GHz, 6 GHz | |
WPS | True | |
General | ||
General | Operation Modes |
|
Mesh | Cudy Mesh | |
Mesh Backhaul |
|
|
Multi-Band Backhaul | true | |
WAN Mode |
|
|
Internet Failover Sequence |
|
|
Network | ||
Network | QoS | Per-User Rate Limiting |
DHCP |
|
|
IP Versions | IPv4/IPv6 | |
IPv6 Protocols |
|
|
IPTV/VLAN |
|
|
TTL Customization |
|
|
IGMP |
|
|
Forwarding |
|
|
Firewall |
|
|
Application Layer Gateway |
|
|
Utilities | ||
Utilities | VPN Server |
|
VPN Client |
|
|
DNS Options |
|
|
DNS over TLS Providers |
|
|
Wake on LAN | True | |
Online Detection | True | |
Management | ||
Management | All Devices Management |
|
Per-Devices Management |
|
|
Content Management |
|
|
System | ||
System | LED Control | ture |
Local Control Method |
|
|
Remote Control Method |
|
|
Firmware Upgrade |
|
|
Reliability |
|
|
Diagnostic Tools |
|
|
Languages |
|
|
Dashboard | ||
Dashboard | Panel |
|
Charts |
|
- Le débit réel des données sans fil varie en fonction des conditions du réseau, des limites du client et de facteurs environnementaux, notamment la disposition du bâtiment, les obstacles et l'emplacement du client.
- Les performances réelles de plusieurs appareils peuvent être affectées par les types d'applications utilisées, la bande passante totale disponible et les capacités de vos appareils. La connexion d’anciens appareils Wi-Fi (anciennes normes) peut réduire l’efficacité globale. L’utilisation des fonctionnalités d’efficacité nécessite des appareils clients compatibles qui prennent également en charge ces fonctionnalités. Trouvez plus d’informations sur les fonctionnalités d’efficacité prises en charge dans la section Logiciel de la feuille de calcul Spécifications.