Предупреждения
На этой веб-странице перечислено программное обеспечение устройств, поддерживающих систему OpenWrt. Прежде чем загружать и устанавливать программное обеспечение, обратите внимание, что OpenWrt Project — это операционная система Linux, предназначенная для встроенных устройств. Вместо того, чтобы пытаться создать единую статическую прошивку, OpenWrt предоставляет полностью доступную для записи файловую систему с управлением пакетами. Это освобождает вас от выбора и настройки приложений, предоставляемых поставщиком, и позволяет настроить устройство с помощью пакетов для соответствия любому приложению. Для разработчиков OpenWrt — это платформа для создания приложения без необходимости создания на его основе полноценной прошивки; для пользователей это означает возможность полной настройки и использования устройства непредвиденными способами.
Описание
<ол>Гарантия:
Кади настоящим заявляет
<ол>Загрузите прошивку OpenWrt для удаления проверки подписи: Диск
Поиск прошивки OpenWrt (не выпущен Cudy): Выбор прошивки OpenWrt
Комментариев: 146
@WR3000S,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Is it possible to upload OpenWRT to the WR3000S router ? where can i find image and instructions.”
@Bill,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you via email. Please check.
“Can you email me the signed intermediate OpenWRT firmware for WR3000S?
Thanks.”
Can you email me the signed intermediate OpenWRT firmware for WR3000S?
Thanks.
Is it possible to upload OpenWRT to the WR3000S router ? where can i find image and instructions.
@mike_ds,
Dear Customer,
Thank you for contacting Cudy support team.
The letter says that it will be impossible to return to the manufacturer’s firmware after switching to Openwrt. —No, you can return to the manufacturer’s firmware after switching to Openwrt via the TFTP method.
Tell me, is the Openwrt firmware that you sent stable? --This is not the OpenWrt firmware, this is just a intermediate firmware.
For the functions of the Openwrt firmware, you need to check it by yourself, we don’t know that. It is not developed by Cudy.
“Dear manufacturers. I want to install Openwrt on my Cudy AP3000 v1.0 access point (round with 2.5G port). You recently sent me the firmware by email – I am very grateful to you for your quick response. The letter says that it will be impossible to return to the manufacturer’s firmware after switching to Openwrt. What is the reason for this impossibility of returning to the factory? Tell me, is the Openwrt firmware that you sent stable? Will I regret this transition? Will the firmware have VLAN and Multi-SSID network management for wireless adapters, does PoE and the 2.5G port work in Openwrt? It is important for me to know the stability and performance of the Openwrt firmware before I transfer the AP3000 v.1.0 to a firmware from which it will then be impossible to return to factory settings. When the access point starts on the factory firmware, I see in the address line a reference to the luci interface, that is, similar to Openwrt, but modified by your development team. Therefore, I do not understand why it is impossible to switch back to the factory, in case of failure.”