什麼是存取點模式？ >
存取點模式是路由器使用與主路由器或數據機路由器的有線連接來擴展家庭網路的無線覆蓋範圍.< /span>
常見網路拓樸：
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或http://192.168.10.1。
詳情請參閱如何登入網頁介面Cudy 路由器？ >
第2 步： 將彈出"快速設定"窗口，選擇"無線存取點"，然後點選"下一步"< /strong> .
第 3 步： 選擇您的"時區"。
第 4 步：確認硬體連線。
第 5 步： 更改無線網路名稱和密碼。
第 6 步： 點選"儲存並套用"完成設定。
第7步： 等待幾秒鐘系統重新啟動，當再次彈出登入頁面時，您就可以享受網路了。
注意： 將Cudy路由器設定為Access Point模式後，IP位址將由主機路由器分配，預設IP位址192.168.10.1將無法登入。 "http://cudy.net/">http://cudy.net"，或在主（主）路由器的客戶端尋找Cudy 路由器的IP 位址清單。
22 則留言
Hi, and in the situation below, can there be another router before the Wr3000? I mean, can there be another router connected to the WAN, then connected to the wr3000?
Dear Customer,
Please follow the steps:
1. Connect the one of the WR3000 to connect the modem and connect to the internet. Work as the main mesh router.
2. Reset the other WR3000 to factory default.
3. Connect the WAN port of the second WR3000 to the LAN port of the main mesh router. Then the two router will install mesh system automatically. Then everything works.
“I’d like to setup internet by using 2x cudy wr3000 they will be connected via cable with eachother. One of them will be connected to a ISP modem (Wan port of one cudy router connected to modem), then cudy routers connected with eachother using their lan port. Could you tell me what’s best way to configure such connection? Goal is to have good wifi coverage without ip conflicts and be able to also connect devices by ethernet to those routers”
@Roberto,
Dear Customer,
Thank you for contacting Cudy support team. Our technical support has contacted you via email. Please check.
“Desde que lo compre sigo sin utilizarlo ya que no llega nunca a 1 mega,ni hacer cosas con el pc”
Desde que lo compre sigo sin utilizarlo ya que no llega nunca a 1 mega,ni hacer cosas con el pc
@Luke,
Dear Customer,
Please follow the steps:
1. Connect the one of the WR3000 to connect the modem and connect to the internet. Work as the main mesh router.
2. Reset the other WR3000 to factory default.
3. Connect the WAN port of the second WR3000 to the LAN port of the main mesh router. Then the two router will install mesh system automatically. Then everything works.
“I’d like to setup internet by using 2x cudy wr3000 they will be connected via cable with eachother. One of them will be connected to a ISP modem (Wan port of one cudy router connected to modem), then cudy routers connected with eachother using their lan port. Could you tell me what’s best way to configure such connection? Goal is to have good wifi coverage without ip conflicts and be able to also connect devices by ethernet to those routers”
I’d like to setup internet by using 2x cudy wr3000 they will be connected via cable with eachother. One of them will be connected to a ISP modem (Wan port of one cudy router connected to modem), then cudy routers connected with eachother using their lan port.
Could you tell me what’s best way to configure such connection? Goal is to have good wifi coverage without ip conflicts and be able to also connect devices by ethernet to those routers