如何在 Cudy LTE 路由器上設定無線路由器模式和 4/5G 備援？

Cudy LTE路由器具有LAN/WAN端口，因此我們可以改變端口工作模式，並使用4G/5G網路作為上網的備援解決方案。當LAN/WAN口工作為WAN模式時，如果原有網路服務故障，路由器將連接4/5G網路。

第1步：確保4/5G網路已設定成功。
第 2 步：將路由器的 LAN/WAN 連接埠連接到數據機或網路連接埠。
注意：請確保您已有數據機或您的網路來自為您提供網路的乙太網路插座。
第 3 步：開啟網頁瀏覽器並造訪 http://cudy.net 或 http://192.168.10.1。
第 4 步：進入進階設定->LAN/WAN 交換器。
第5步：點選"切換到WAN"，路由器將重新啟動並套用設定。
第6步：設定完成後，您將在"系統狀態"頁面中看到下列狀態。



返回網誌

4 則留言

DAVID Please contact the problem to supportcudy.com

“The WAN feature is not functioning, diagnostic tool says the IP address must be provided, but the router is not automatically detecting the IP address and I do not have the IP address from the ISP. Please help.”

Cudy Support

The WAN feature is not functioning, diagnostic tool says the IP address must be provided, but the router is not automatically detecting the IP address and I do not have the IP address from the ISP. Please help.

David

@EZEQUIEL
Our technical support has contact you via email.

“Is not working, I made this, then disconnect the internet cable of my router but cudy backup do not give 4g/5g backup to the people connected to the LAN… is very important for us to make this work, is there more information?”

Cudy Support

Is not working, I made this, then disconnect the internet cable of my router but cudy backup do not give 4g/5g backup to the people connected to the LAN… is very important for us to make this work, is there more information?

Ezequiel

發表留言