Recently, we received feedback that our router cannot work properly with the T-Mobile, like no internet or can only get IPv6 internet, etc. We created a beta firmware to fix and improve the performance.
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1. Input the password to log in.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: Go to Advanced Settings->Firmware to upgrade the beta firmware below.
LT18 Firmware: Cudy LT18 Software Download
LT450 Firmware
V1 (Micro SIM card): LT450-R9-1.15.5beta-20221121-180014-flash.bin
V2 (Nano SIM card): Cudy LT450 Software Download
LT500 Firmware
V1 (Micro SIM card): LT500-R9-1.15.5beta-20221121-180014-flash.bin
V2 (Nano SIM card): Cudy LT500 Software Download
LT500D Firmware
V2 (Nano SIM card): Cudy LT500D Software Download
Step 3: Advanced Settings-> IPv6 to enable IPv6, Save & Apply.
Step 4: Go to Advanced Settings -> TTL -> Custom and set TTL to 65, HL to 65.
Step 5: Go to General Settings->4G/Cellular.
1. Set Network mode as 4G only
2. Set APN profile as Manual
3. Set APN as fast.t-mobile.com (Note: for static IP plan, set APN as b2b.static)
4. Leave username and password blank.
5. Set Authentication as PAP+CHAP
Note: For the APN, you will need to double confirm since they may change without notice.
Step 6: Save & Apply, wait about 5 minutes, then check the connection. If it still doesn't work, please contact support@cudy.com with the Diagnosis bin file. (Diagnostic Tools->Diagnosis->GO->Download)
6 comments
Dear Jose,
Our technical support has sent you the firmware via email. Please check.
“None of the underlined ‘links’ in this page have actual HTTP links embedded in them that you can click on. What’s the deal here? I want to download the latest firmware for the Cudy LT500 v1.0”
None of the underlined ‘links’ in this page have actual HTTP links embedded in them that you can click on. What’s the deal here? I want to download the latest firmware for the Cudy LT500 v1.0
Dear Rui Manuel Jordão Mendes,
Our technical support has replied you via email. Please check.
“I’m struggling to connect through the app . I have a LT500D on version 2 and firmware version on 2.1.1 and on the app it detects the router bur when I insert the administrator password, it gives me ‘’ network error ’’ the password is the good one.
Thanks can I do something?”
I’m struggling to connect through the app . I have a LT500D on version 2 and firmware version on 2.1.1 and on the app it detects the router bur when I insert the administrator password, it gives me ‘’ network error ’’ the password is the good one.
Thanks can I do something?
Dear Sally,
Please download the latest firmware of LT500 Outdoor on the website.
https://www.cudy.com/pages/download-center/lt500-outdoor-1-0
need to download new firmware for lt500 outdoor cudy