Che cos'è la modalità punto di accesso?
La modalità Access Point indica che il router utilizza una connessione cablata al router principale o al modem router per espandere la copertura wireless per una rete domestica .
Topologia di rete comune:
Passaggio 1: apri un browser web e vai su http://cudy.net o http://192.168.10.1.
Per i dettagli, fare riferimento a Come accedere all'interfaccia web di Cudy Router?
Passaggio 2: verrà visualizzata la finestra Configurazione rapida, scegli "Punto di accesso wireless", quindi fai clic su "Avanti" .
Passaggio 3: scegli il tuo "fuso orario".
Passaggio 4: conferma la connessione hardware.
Passaggio 5: cambia il nome e la password della rete wireless.
Passaggio 6: fai clic su "Salva e applica" per completare la configurazione.
Passaggio 7: attendi qualche secondo per il riavvio del sistema, quando viene nuovamente visualizzata la pagina di accesso, puoi goderti Internet.
Nota:
Dopo aver configurato il router Cudy in modalità Access Point, l'indirizzo IP verrà assegnato dal router host e l'indirizzo IP predefinito 192.168.10.1 non sarà in grado di accedere. Se è necessario accedere al router Cudy di nuovo, digita 'http://cudy.net' nel tuo browser o cerca l'indirizzo IP del router Cudy nel client del router principale (primario) elenco.
22 commenti
Hi, and in the situation below, can there be another router before the Wr3000? I mean, can there be another router connected to the WAN, then connected to the wr3000?
Dear Customer,
Please follow the steps:
1. Connect the one of the WR3000 to connect the modem and connect to the internet. Work as the main mesh router.
2. Reset the other WR3000 to factory default.
3. Connect the WAN port of the second WR3000 to the LAN port of the main mesh router. Then the two router will install mesh system automatically. Then everything works.
“I’d like to setup internet by using 2x cudy wr3000 they will be connected via cable with eachother. One of them will be connected to a ISP modem (Wan port of one cudy router connected to modem), then cudy routers connected with eachother using their lan port. Could you tell me what’s best way to configure such connection? Goal is to have good wifi coverage without ip conflicts and be able to also connect devices by ethernet to those routers”
@Roberto,
Dear Customer,
Thank you for contacting Cudy support team. Our technical support has contacted you via email. Please check.
“Desde que lo compre sigo sin utilizarlo ya que no llega nunca a 1 mega,ni hacer cosas con el pc”
Desde que lo compre sigo sin utilizarlo ya que no llega nunca a 1 mega,ni hacer cosas con el pc
@Luke,
Dear Customer,
Please follow the steps:
1. Connect the one of the WR3000 to connect the modem and connect to the internet. Work as the main mesh router.
2. Reset the other WR3000 to factory default.
3. Connect the WAN port of the second WR3000 to the LAN port of the main mesh router. Then the two router will install mesh system automatically. Then everything works.
“I’d like to setup internet by using 2x cudy wr3000 they will be connected via cable with eachother. One of them will be connected to a ISP modem (Wan port of one cudy router connected to modem), then cudy routers connected with eachother using their lan port. Could you tell me what’s best way to configure such connection? Goal is to have good wifi coverage without ip conflicts and be able to also connect devices by ethernet to those routers”
I’d like to setup internet by using 2x cudy wr3000 they will be connected via cable with eachother. One of them will be connected to a ISP modem (Wan port of one cudy router connected to modem), then cudy routers connected with eachother using their lan port.
Could you tell me what’s best way to configure such connection? Goal is to have good wifi coverage without ip conflicts and be able to also connect devices by ethernet to those routers