| Model Version | ||
|---|---|---|
| Model Version | AP3000 Wall 1.0 | |
| CPU | ||
| CPU | Chipset | MT7981BA |
| CPU Details | 1.3 GHz Dual-Core CPU | |
| Memory/Storage | ||
| Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
| DDR/RAM | 256 MB (2 Gbit) DDR3 | |
| Wireless | ||
| Wireless | 5 GHz Wi-Fi Speed | 2402Mbps |
| 2.4 GHz Wi-Fi Speed | 574 Mbps | |
| 5 GHz Wi-Fi Streams | 3T3R (3×3 MIMO) | |
| 2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
| Wi-Fi Antennas | 3× Internal | |
| 5 GHz Antenna Gain Max | 7.08dBi | |
| 2.4 GHz Antenna Gain Max | 3.17dBi | |
| FEM or PA/LNA |
|
|
| Beamforming | True | |
| Range Performance |
Max: 80 m (262 ft) Indoor WiFi range varies depending on the layout and wall materials. See Wall Performance spec for placement suggestions. |
|
| Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') |
|
| Interfaces | ||
| Interfaces | Gigabit RJ45 Ports | 5 |
| Ethernet Notes | The port on the back accepts PoE powering. One port on the front bottom provides PoE. | |
| LED | System | |
| Physical Buttons |
|
|
| Power Input | PoE via Ethernet Port | |
| Power | ||
| Power | Power Methods |
|
| Passive PoE | 48V | |
| Max Power Consumption (W) | 12 W (48 V PoE) | |
| Idle Power Consumption (W) | 5 W (48 V PoE) | |
| Reliability | ||
| Reliability | Advanced | Hardware Watchdog |
| ESD Contact Protection | 4kV | |
| ESD Air Protection | 8kV | |
| Environment |
Operating Temperature: 0 ℃ ~ 40 ℃ (14 ℉ ~149 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 90% non-condensing |
|
| Certifications | ||
| Certifications | FCC, CE | |
| Mechanical | ||
| Mechanical | Installation | Wall-mount |
| Dimension |
143×86×27.6 mm 5.63×3.39×1.09 inches |
|
| Package Content | ||
| Package Content |
|
|
| Model Version | ||
|---|---|---|
| Model Version | AP3000 Wall 1.0 | |
| Wireless | ||
| Wireless | Wi-Fi Standards | Wi-Fi 6 |
| Max Wi-Fi Modulation | 1024-QAM | |
| Wi-Fi Efficiency |
|
|
| Max Capacity | 256 | |
| Recommended Client Upper Limit | 100 | |
| Max Wi-Fi Channel Width | 160 MHz | |
| Wi-Fi Security | WPA/WPA2/WPA3 | |
| Multi-SSID (Max Number) | 8 SSIDs (Up to 4 SSIDs on each band) | |
| WPS | True | |
| General | ||
| General | Operation Modes | Access Point |
| Mesh | Cudy Mesh | |
| Mesh Backhaul |
|
|
| Multi-Band Backhaul | True | |
| Network | ||
| Network | DHCP | Server |
| IP Versions | IPv4 | |
| IGMP | IGMP Snooping | |
| Utilities | ||
| Utilities | Wake on LAN | True |
| Management | ||
| Management | All Devices Management | Wi-Fi Time Schedule |
| System | ||
| System | LED Control | True |
| Local Control Method |
|
|
| Remote Control Method |
|
|
| Firmware Upgrade |
|
|
| Reliability |
|
|
| Diagnostic Tools |
|
|
| Languages |
|
|
| Dashboard | ||
| Dashboard | Panel |
|
| Charts |
|
|
- Actual wireless data throughput will vary as a result of network conditions, client limitations, and environmental factors including building layout, obstacles, and client location.
- The wireless coverage claim serves as a reference only. Coverage performance will vary due to environmental factors including building layout, obstacles, traffic volume and density, and device location. For optimal coverage, please place the device in a central location within the area requiring Wi-Fi.
- Actual performance for multiple devices may be affected by the types of applications used, the total available bandwidth, and the capabilities of your devices. Connecting older Wi-Fi devices (legacy standards) may reduce overall efficiency. Using efficiency features requires compatible client devices that also support those features. Find more information about supported efficiency features in the software section of the Specs spreadsheet.
